After the initial lacing to the NOVATEC hub,  we began to use taiwanese Powerway. Structurally are identical to the Novatec, and we have the ability to set such bearings will be fitted. We use durable standard “ENDURO” bearings, on request is the ability to deliver the hub with ceramic bearings.

For classic spokes with J bend the wires we offer hubs Spinollo AH08M.

Very light hubs – Alu AL6061 / T6 material. Flanges for J bend spokes have elliptical holes, so it is possible to use flat aero spokes with a width of 3.3 mm. Front Hub with 20 holes for radial spokes. Rear hub 24 holes with 2: 1 Spoke Hole Pattern. 16 spokes 2x crossed per cassette, and 8 radial spokes on the left side. Cassette body   Shimano 11 / 10st. or Campagnolo.  Hubs with ENDURO bearings, 2pcs in front and 4pcs in rear hub.

Front Hub  AH08M weight 70g,  Rear Hub AH08M weight 205g.
Hubs are in stock in black.

 

On the hubs Spinollo AH11SC or DT Swiss 240s we are doing the wheels of Spinollo with Straight Pull spokes.

Hubs are fitted with flanges for the Straight Pull spokes. The body and axle hubs from Alu. In the central part of the hub reinforcement layer of carbon. Front hub with 20 holes, rear 24 holes. Rear hub 24 holes with 2: 1 Spoke Hole Pattern. 16 spokes 2x crossed per cassette, and 8 radial spokes on the left side. Cassette body   Shimano 11 / 10st. or Campagnolo. The hubs contained encapsulated ball bearings, 2 in the front and in the rear hub 4pcs.blank

Front Hub  AH11SC weight is 85g,  Rear Hub AH11SC weight is 210g.

We stock cartridges in black. You can also order in red.

 

 

 

In the menu, we also have a road hub for disc brake Spinollo AH14DH.

blank

They are disk hub for road and Cyclocross bikes. They are equipped with high-quality machine bearings ABI Enduro with increased resistance.

Replaceable end caps allow use in both quick and fixed axle frames.

Brake system  INTL-6 holes, flange with 24 holes on the front and rear hub.

Replaceable end caps for fixed 12 and 15mm front and rear axles.

The length axis of the OLD 100 mm front and 130, 135 or 142 mm rear hubs.  Casste body Shimano 11/10/9, st.

Weight front hub AH14DH si 139g and weight rear hub AH14DH is 273g.

 

For production of MTB bikes, we have a disc hub Powerway M31.

The bullets have a flange for straight pull spokes and Exchange endcups for the front and rear axis.

blank

It is possible to use the standard quick release, 9 mm quick release and a thru axle with 12 mm and 15 mm thru axle.

  • holes 28 front and rear 28. It is possible to order the 24 + 24 hole hubs.
  • casste body: Shimano/SRAM 11/10/9, st.

Weight front hub M31SP is 145g and rear hub M31SP is 259g.